DBM 150FR Booklet Maker

The DFC-120 is a vertically arranged collator available in a 12 station configuration with an output speed of up to 4,200 sets/hour. It can be used as a stand-alone unit or connected to a bookletmaker. The DBM-150 is Duplo’s entry level bookletmaker designed for low to mid volume production. The 150Fr Booklet System is the most user-friendly system available in the market today.

• Fully automated bookletmaking system
• Offset and straight stacking
• Speed up to 2400 books per hour
• Bi-directional run
• Modular

Booklet Making Process

Finishing modes: The 150Fr Booklet System can finish side stapling, corner stapling and fold saddle stapling applications. It is also possible to produce fold only applications.

Great for use in

Menus, Catalogues, Brochures, Magazines, Newsletters, Course Work , Hymn Book Order of Service, CD Booklets, Medical Journals, Collated work for binders

• Compact footprint - The 150 Bookletmaker and Trimmer is 13% smaller than its predecessor the 120 system. The small footprint of this booklet system makes it easy to install in places with limited space. The 150Fr Booklet System is an ideal companion for low to mid volume users such as Quick printers, Copy shops and In-plants such as Schools, Universities, Churches to name a few. Despite its small size, this system can finish a wide range of applications.

• Media - The 150Fr Booklet System can finish a wide range of applications. It can handle sheet sizes from 148mm x 210mm to 320mm x 450mm and paper weights from 64gsm to 128gsm.

• Reliable paper handling - The 3 friction feed wheels ensure maximum contact with the paper for flawless and consistent delivery. It can feed bond, NCR, light card, folded sheets and even certain coated stocks. The separator pressure and tray pressure on each bin can be individually controlled.

• User-friendly - The 150 bookletmaker and trimmer features a state of the art control panel which is very simple and easy to use. The operator can set up a job in four simple steps. Overall the 150C Booklet System is an extremely user-friendly bookletmaker which requires very little training.

• Automatic set-up - The booklet size on the 150Fr Booklet System can be changed without any tools and takes only a few seconds. Simply select the required size and the guides and trimming position adjust automatically. If required, the operator can adjust the stapling position manually.

• Finishing modes - The 150Fr Booklet System can finish side stapling, corner stapling and fold saddle stapling applications. It is also possible to produce fold only applications.

• Straight or Offset Collating - The collating tray on the DFC-120 collator has a 78mm stacking capacity and can be run in offset mode or straight collate mode depending on the requirements of the job. The machine automatically stops when the catch tray is full so the machine can be left to run without continuous supervision.

• Block Mode - The Block Mode programme enables the DFC-120 to be split in half allowing the operator to load bins whilst another job is running, even with different paper sizes. This increases productivity & efficiency as down time is dramatically reduced.

• Trimmer - The 150 trimmer is fully automatic and is programmed from the 150 bookletmaker. The operator can adjust the trimming position from 1 to 20mm.

• Hand-feeding - The 150 Bookletmaker and Trimmer can be used as a stand-alone system. The operator can manually feed sets through the hand feeder, which is ideal for very short run or pre-collated jobs.

• Modularity - This modular system can be customised according to the end users needs, allowing them to configure and expand as their demands change.